FRANKENSTEIN: THROUGH THE EYES OF THE MONSTER

 Hints taken from the Public Domain, originally by Jacques Dupont
  with help of Erik Gos, Michael J. Stowe, Steven Den Beste, and
                           some others.

@~These are a few bits I've had calls about ... Sue

The Wine Cellar Maze:

From the entrance of this maze, follow these directions: forward,
forward, forward, right, forward, left, forward, right, forward,
left, forward, forward. You will eventually come to a small room
leading to the melting chamber.

The Ore Processing Plant

Once in the ore processing plant, look around. Activate the
conveyor in the back of this cavern (rocks will begin to be
carried toward the ore processing plant when all four conveyors
are on). Turn right and push the black button on the machine. Head
toward the control panel and pull the left switch to activate the
crushing machine. Use the black and red buttons to crush the ore
with the left or right crusher. You need to crush each boulder two
times. If the processing plant shut off, pull the lever and
restart the machine from the beginning. After enough ore has been
produced, you will hear a signal.

The Melting Chamber

Go toward the left stairway and you will come facing a control
panel. This panel has various controls and switches. The upper two
switches control the claw power (left one) while the right is the
electric switch. On the left side, is the vertical claw control.
In the upper middle lies the horizontal claw control. Just below
it, you will see the temperature gauge (left side) and temperature
control lever (right side). At the bottom of the control panel,
you will find the voltage control (left) and the voltage meter
(right).

It took me several tries but the following actions worked out:
Switch claw power on. Pull horizontal claw control to the right.
Pull vertical claw control down (the claw will gather the ore) and
up again (ore will be lifted). Pull the horizontal claw control to
the left and pull down the vertical claw control down (The ore
will be put in the melting machine). Pull it back up. Increase
temperature to the maximum with the temperature control lever. Use
voltage control to increase voltage to 80. Pull the electric
switch on (the angle of the claw will be raised). Pull down the
vertical control claw, and up again (now you see a glowing white
mass in the claw). Pull the horizontal claw control to the right
(the claw will put the white crystal in the wagon).







                              - o -